Toshiba e-studio 207 - Page 158

e-STUDIO167/207/237 © 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved
PAPER FEEDING SYSTEM
10 - 14
[E] Bypass pickup roller
[F] Bypass feed roller
(1) Take off the bypass roller unit.
 P.10-12 "[D] Bypass roller unit"
(2) Take off the bypass pickup roller and the
shaft.
Fig. 10-18
(1) Take off the bypass roller unit.
 P.10-12 "[D] Bypass roller unit"
(2) Remove 1 clip. Then pull out the shaft.
(3) Take off the bypass feed roller.
Fig. 10-19
Shaft
Bypass pickup roller
Bypass feed roller
Shaft
Clip