e-STUDIO167/207/237 © 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved
POWER SUPPLY UNIT
15 - 4
15.4 Fuse
When the power supply secondary fuse is blown out, confirm that there is no abnormality with each part
using the following table.
Voltage Board/Unit Part Fuse type
+24V MAIN board Scan motor M1 F203: 4A
Polygonal motor M4
Switching regulator cooling fan M6
Registration clutch CLT1
Pickup solenoid SOL1
Bypass pickup solenoid SOL2
Contact image sensor unit CIS
PFC board Exit motor M7
ADU board ADU motor M8
PFU
PFP
+24VDF ADF
+24VCOV-OFF MAIN board Toner motor M2 F201: 4A
Main motor M3
Exhaust fan M5
Auto-toner sensor S6
Discharge LED ERS
Coin controller
To Next Page
Loading...
