Toshiba e-studio 207 - Page 28

e-STUDIO167/207/237 © 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
2 - 12
2) Sensors and switches
3) Electromagnetic clutch
4) Solenoids
Symbol Name Function Remarks P-I
S1 HOME-SNR
CIS home position sensor
Detecting CIS home position Fig. 2-3 10-106
S2 PLTN-SNR
Platen sensor
Detecting the opening/closing of platen
cover or RADF
Fig. 2-3 9-101
S3 TEMP/HUMI-SNR
Temperature/humidity sensor
Detecting the temperature and humidity
inside the equipment
Fig. 2-4 5-16
S4 RGST-SNR
Registration sensor
Detecting the transporting paper at the
registration roller section
Fig. 2-7 15-107
S5 EXIT-SNR
Exit sensor
Detecting the transporting paper at the
exit section
Fig. 2-5 24-8
S6 ATTNR-SNR
Auto-toner sensor
Detecting the density of toner in the
developer unit
Fig. 2-6 21-46
S7 EMP-SNR
Paper empty sensor
Detecting presence/absence of paper
in the drawer
Fig. 2-8 15-107
S8 SFB-SNR
Bypass paper sensor
Detecting presence/absence of paper
on the bypass tray
Fig. 2-9 13-101
S9-13 APS 1-3, APS-C, APS-R
Automatic original detection sensor
Detecting original size
* S9: only for A4 series models
Fig. 2-3 9-9,
9-19
SW1 MAIN-SW
Main switch
Turning ON/OFF of the equipment Fig. 2-4 5-4
SW2 ADU-COV-INTLCK-SW
ADU cover opening/closing interlock
switch
Controlling cutoff and supply of the 24V
voltage by opening/closing of the ADU
cover
Fig. 2-4 6-8
SW3 FRNT-COV-INTLCK-SW
Front cover opening/closing interlock
switch
Controlling cutoff and supply of the 24V
voltage by opening/closing of the front
cover
Fig. 2-4 1-5
SW4 FRNT-COV-SW
Front cover opening/closing switch
Detecting the opening/closing of the
front cover
Fig. 2-4 1-101
SW5 CST-SW
Drawer detection switch
Detecting presence/absence of the
drawer
Fig. 2-8 16-110
Symbol Name Function Remarks P-I
CLT1 RGST-CLT
Registration clutch
Driving the registration roller Fig. 2-7 16-21
Symbol Name Function Remarks P-I
SOL1 CST-SOL
Pickup solenoid
Controlling the power transmission of
the feed roller
Fig. 2-7 16-9
SOL2 SFB-SOL
Bypass pickup solenoid
Controlling the power transmission of
the bypass pickup roller
Fig. 2-9 14-15