2
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO167/207/237
OUTLINE OF THE MACHINE
2 - 31
[B] MY-1027 (Paper Feed Unit (PFU))
[B-1] When PFP is not installed
(8) Remove 2 screws on the front side.
Fig. 2-43
(9) Slide the ADF/RADF backward and take off
by lifting it up.
Fig. 2-44
(1) Turn the power OFF and unplug the power
cable.
(2) Remove 1 screw and take off the PFU con-
nector cover.
Fig. 2-45
To Next Page
Loading...
