2
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO167/207/237
OUTLINE OF THE MACHINE
2 - 37
[C] KD-1022 (Paper Feed Pedestal (PFP))
(8) Remove 1 screw and take off 1 fixing bracket
on the rear right side.
Fig. 2-61
(9) Take off the PFU while lifting it up.
Fig. 2-62
(1) Take off the equipment and the PFU. Then
take off the PFP.
P.2-35 "[B-2] When PFP is installed"
Fig. 2-63
To Next Page
Loading...
