7 TROUBLESHOOTING AND SPECIFICATIONS
122 Troubleshooting
Reception troubles
If the suggested action does not solve the trouble or you encounter trouble not listed above,
contact your service technician or service representative.
Trouble Check Point
Originals cannot be received even if
the [START] button is pressed.
Is the modular cord disconnected?
Is there a problem at the sender's Fax? Check this with the party trying
to send the original.
Paper is not output. Is the equipment out of paper?
The received original is printed dark
and is illegible or black stripes are
printed on the original.
Make a local copy and confirm proper printing.
Is the original being sent a dirty copy? Check this with the party trying to
send the original.
Is the trouble due to a problem or operation error at the sender's Fax?
Check this with the party trying to send the original.
Paper is output but not printed.
Is there enough toner?
Is the original placed correctly on the sender's Fax? Check this with the
party trying to send the original.
Paper often misfeeds.
Is the paper drawer size setting correct?
Is the paper drawer properly inserted?
Is the specified paper type being used?
To Next Page
Loading...
