5 SENDING A N/W-FAX
82 Faxing from Applications
SNMP settings
If the recipient’s TOSHIBA MFP is not found over the network and the fax job is not sent
normally, the SNMP settings may be the cause. Check that the SNMP settings are correct in
the [SNMP Settings] dialog box, and if not, change them.
Ask the administrator for details on the SNMP settings configured for your TOSHIBA MFP.
Community Name: If a community name other than “public” (default) is set for the SNMP
community name for your TOSHIBA MFP, change it.
To send fax jobs normally, the same SNMP community name must be set in both this
equipment and the FAX driver. For details, ask your administrator.
Up to 31 characters including the following symbols can be entered for the Community
Name.
! " # $ % & ' ( ) * + , - / : ; < = > ? @ [ ? ] ^ _ ` { | } ~
To Next Page
Loading...
