5 SENDING A N/W-FAX
78 Faxing from Applications
Setting up the cover sheet properties
In the [Cover Sheet] tab of the network fax properties dialog box, you can specify the fax cover
sheet to be sent. If you enable the cover sheet, the cover sheet is attached in the first page of
the document and sent to the recipients.
1) Select cover sheet
Select the cover sheet type from the box.
2) Destination List
Check this to print recipient information on the cover sheet. Selecting “Show all
Destinations” will print all recipients. Selecting “Show Only One whom Received” will print
the recipient at the top of the [List of Destination] field.
3) Sender Information
Check this to print sender information entered in the [Sender Information] fields on the
cover sheet.
4) Date/Time
Check this to print date and time on the cover sheet.
5) With a Message
Check this to enter the message to appear on the cover sheet. You can enter up to 256
characters.
6) Sender Information
Enter sender information in the fields to be printed on the cover sheet. You can enter up to
64 characters in each field.
1
5
6
2
3
4
To Next Page
Loading...
