2.SENDING A FAX
Basic Procedures 33
2 SENDING A FAX
Settings
EXPOSURE
Set the density at which the original is to be scanned.
ORIGINAL MODE
Set the scanning mode based on the type of the original.
In the TEXT/PHOTO mode or PHOTO mode, transmission time may be longer than that in
the TEXT mode.
RESOLUTION
Set the resolution based on the fineness of the original.
The Resolution Settings screen can also be displayed by pressing [RESOLUTION].
If the recipient’s fax machine is not capable of receiving originals at the same
resolution, the resolution is automatically converted before being sent to the recipient.
The higher the resolution is, the longer it takes to send an original.
QUALITY TX
Switch Quality TX ON or OFF. When this mode is set to ON, originals are sent at a slower
speed than usual and the chances of errors occurring decrease.
AUTO: This equipment automatically detects the contrast of the original, and
scans it with the optimum density.
Manual:
Press or to set the desired contrast.
TEXT: This is suitable for an original with text and line drawings.
TEXT/PHOTO: This is suitable for an original with a mixture of text and photos.
PHOTO: This is suitable for an original with photos.
STANDARD: This is suitable for an original with regular size text.
FINE: This is suitable for an original with small size text and fine illustrations.
ULTRA FINE: This is suitable for an original with ultra-fine illustrations.
To Next Page
Loading...
