2 SENDING A FAX
22 Basic Procedures
Basic Procedures
This section describes the basic procedure to send a fax. For details of each operation, see the
page indicated in the procedure as required.
1
Place the original(s).
Check the original size and scanning range, etc. Place the original(s) on the original
glass or RADF (Reversing Automatic Document Feeder) in the correct direction. (The
illustration above shows the original placed on the original glass.)
P.26 “Setting an original”
2
Press [FAX].
When the department management function is not performed, the fax screen is
displayed.
When the department management function is performed, the following screen is
displayed. Enter the department code (5-digit) in it using the digital keys and press the
[OK] button. To correct the values entered, press the [CLEAR/STOP] button.
e-STUDIO2802AF e-STUDIO2809A Series
DEPARTMENT CODE
_
:12
To Next Page
Loading...
