e-STUDIO2500c/3500c/3510c
Mac
For Macintosh
* This adjustment will have an effect only on full-color printing.
Open the print dialog box. Change the "Color Balance" option, the "Brightness" or "Saturation" option.
* The menu to select varies according to the operating system. Refer to the table below and select the menu.
OS Menu
8.6 / 9.x
"Color Settings 3" Ö "Color Balance"
"Color Settings 4" Ö "Brightness" or "Saturation"
10.2.x
"Printer Features" Ö "Feature Sets: Color settings 3" Ö "Color Balance"
"Printer Features" Ö "Feature Sets: Color settings 4" Ö "Brightness" or "Saturation"
10.3.x / 10.4.x "Color Settings 2" Ö "Color Balance," "Brightness" or "Saturation"
* Initially, change the value by 4 steps, while checking the printouts until the optimum value is obtained.
After changing the option on the printer driver, print and check the print image quality.
If further image quality adjustments are still necessary, the service technician must use the next procedure.
3. Printer-specific Adjustments
3.3
To Next Page
Loading...
