e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-34
Procedures
* Both the service technician and the user can perform all adjustments.
(1) Change the "Sharpness" option on the printer driver.
For Windows
* This adjustment will have an effect only on Auto or Color mode printing.
Open the property page of the printer driver. Press the [Setting] button in the "Image Quality" tab.
Set the value for "Sharpness" within a range of "1" to "4" in the "Image Attribute" tab.
• Setting "4" provides the sharpest print image.
PCL6 PS3 XPS
3. Printer-specific Adjustments
To Next Page
Loading...
