Toshiba e-STUDIO 2820c - To Make the Light-Colored Area Darker on the Printout

e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-59
3.15 To Make the Light-Colored Area Darker on the Printout
Before the adjustment After the adjustment
The light-colored area becomes darker but the
highly colored area becomes blurred.
Only the light-colored area becomes darker.
 Explanation
When the entire image is printed darker to make the light-colored area darker, the highly colored area may
become much darker and blurred. Change the options on the printer driver or adjust the color balance, in order
to make only the light-colored area darker while leaving the highly colored area as it is.
Print Print
3. Printer-specific Adjustments