e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-71
3.18 To Adjust the Image Density in the Toner Save Mode
Before the adjustment After the adjustment
–
The image density is too dark, even when
printing is performed in the toner save
mode.
The image density in the toner save mode
is adjustable, as desired.
Explanation
The e-E-STUDIO2330C/2820C/2830C/3520C/3530C/4520C offers a toner save mode. It is intended to
automatically decrease the image density and reduce the amount of toner used. Adjust the upper limit of the
image density in the toner save mode, in order to obtain the desired image density requested by a particular user.
Procedures
* The service technician must perform all adjustments.
3. Printer-specific Adjustments
To Next Page
Loading...
