4 EDITING FUNCTIONS
Sheet Insertion 139
Sheet Insertion
You can insert a special type of paper such as colored paper at the desired page. This function is called “sheet
insertion”. You can insert up to 2 types of sheets for a total of 50 pages. The sheet insertion mode has the
following 2 types:
COPIED: Inserts a copied sheet, replacing the specified page.
BLANK: Inserts a blank sheet before the specified page.
1
Place sheets for sheet insertion.
Place them on the bypass tray or in a drawer previously set for insertion sheets. The paper for the
insertion sheets must be placed in a different paper source than normal paper.
y When placing paper in a drawer for sheet insertion, be sure to select “INSERT 1” or “INSERT 2”
as a paper type, and also set the paper size and thickness.
P.23 “Setting paper type”
y When placing paper on the bypass tray, be sure to set the paper size and thickness.
P.47 “Bypass Copying”
y Place the paper for insertion sheets of the same size as normal paper in the same direction.
2
Place the normal paper in the drawer(s).
3
Place the original(s).
When placing them on the original glass, they must be placed from the first page.
4
Press [SHEET INSERTION] on the EDIT menu.
REPORT
2003
1
2
3
4
4
3
REPORT
2003
2
1
3
REPORT
2003
2
1
To Next Page
Loading...
