6 TEMPLATES
188 Recalling Templates
Recalling Templates
When you recall a template, the functions set in the template will be available automatically. If the automatic
start function is enabled, this equipment will automatically start the operation of each function when you press
the button for the corresponding template.
1
Place paper in the drawer(s).
2
Place the original(s).
3
Press [TEMPLATE] on the touch panel.
The template menu appears.
4
Press the button for the group to which the desired template is registered.
You can also select the group by keying in its group number (3 digits).
To switch the menu
Press or .
To Next Page
Loading...
Need help?
General
