2.HOW TO MAKE COPIES
Bypass Copying 57
2 HOW TO MAKE COPIES
6
Press the button of the same size as the envelope you placed on the bypass tray.
y e-STUDIO2550C Series:
y e-STUDIO5055C Series:
The size of the selected envelope will be registered as an “OTHER” size.
7
Press [OTHER] under “COPY”.
The paper size is now set to the size of the envelope placed on the bypass tray. The paper type is
automatically set to [ENVELOPE].
8
Select other copy modes as required, and then press the [START] button on the control
panel.
Copying starts. When the Saddle Stitch Finisher is installed, the envelope exits to the exit tray of the
equipment.
When the Inner Finisher is installed, the envelope exits to the receiving tray of the finisher.
Every 10 copies, take the envelopes out from the exit tray.
To Next Page
Loading...
Need help?
General
