3.PRINT FUNCTIONS
Setting Up Print Options 77
3 PRINT FUNCTIONS
[Basic] tab
The [Basic] tab contains basic print operation settings, such as the original paper size, print paper size, paper source,
paper type, orientation, and so on.
1) Original Paper Size
Selects the size of a document to be printed.
The default paper size will be [Letter] or [A4] according to the regional setting in the Windows.
Setup items differ depending on the model.
2) Print Paper Size
Enlarges or reduces a page image to fit exactly in the selected paper size. If you do not wish to enable enlarge or
reduce printing, select [Same as Original Size].
3) Manual Scale
Enter the scale manually to enlarge or reduce an image. The ratio can be set at between 25 and 400%.
If originals which include thin lines are printed when the zoom ratio is set, the line width may vary.
For detailed instructions on how to print with the [Manual Scale] setting, see the following page:
P.89 “Fitting images within paper size”
4) Paper Source
Selects a paper source to print a job in the most suitable paper size. The figure on the right indicates the paper size set
for each paper source. When you select a paper source, the chosen one is indicated with a green square in the figure.
- Auto
— Automatically selects the paper set in this equipment according to the printed document size.
Available original paper sizes are listed below:
A4 (210 x 297 mm)
A5 (148 x 210 mm)
A3 (297 x 420 mm)
B4 (257 x 364 mm)
B5 (182 x 257 mm)
Folio (210 x 330 mm)
Letter (8 1/2 x 11")
Legal (8 1/2 x 14")
Ledger (11 x 17")
Statement (5 1/2 x 8 1/2")
Computer (10 1/8 x 14")
13"LG (8 1/2 x 13")
8.5"SQ (8 1/2 x 8 1/2")
16K (195 x 270 mm)
8K (270 x 390 mm)
Env-Com10 (4 1/8 x 9 1/2")
Env-Monarch (3 7/8 x 7 1/2")
Envelope DL (110 x 220 mm)
Envelope Cho-3 (120 x 235 mm)
Envelope You-4 (105 x 235 mm)
Env-C4 (9.02 x 12.76")
Env-C5 (6.38 x 9.02")
To Next Page
Loading...
Need help?
General
