3 PRINT FUNCTIONS
78 Setting Up Print Options
- Drawer 1 — Paper is fed from the Drawer 1.
- Drawer 2 — Paper is fed from the Drawer 2.
- Drawer 3 — Paper is fed from the Drawer 3.
- Drawer 4 — Paper is fed from the Drawer 4.
- Bypass Tray — Paper is fed from the Bypass Tray.
The selectable values vary depending on the devices installed in this equipment and their configuration on the
[Configuration] tab.
5) Paper Type
Sets the paper type.
- Plain — Printing on plain paper.
- Thick1 — Printing on thick 1 paper.
- Thick2 — Printing on thick 2 paper.
- Transparency — Printing on transparent sheets.
- Thin — Printing on the back side of thin paper.
When [Drawer 1] to [Drawer 4] is selected in the [Paper Source] box, only [Plain] can be chosen in the [Paper
Type] box.
When [Envelope] is selected in the [Print Paper Size] box, [Envelope] will be displayed and you cannot change
the paper type.
6) Number of Copies
Sets the number of printed copies. This can be set at between 1 and 999.
7) Orientation
Sets the paper printing direction.
- Portrait
— The document is printed in the portrait direction.
- Landscape — The document is printed in the landscape direction.
To Next Page
Loading...
Need help?
General
