316
10.WHEN THIS MESSAGE APPEARS
7.“Check paper size setting on control panel for drawer N” (Cont.)
10
7
Press the drawer button corresponding to the one mentioned in the
message on the touch panel.
8
Press the paper size button corresponding to the one placed in the
drawer.
P.45 “4.Setting Copy Paper”
9
Place the paper removed in step 3 in the drawer.
10
Press the [USER FUNCTIONS] button to return to the basic menu.
Set the original and start the copying again.
When “POWER FAILURE” appears, press the [FUNCTION CLEAR] button twice to clear the
message. See P.312 “5.“POWER FAILURE”” for details.
To Next Page
Loading...
