317
10
During copying (using the bypass tray)
2
Remove the jammed paper.
P.282 “4.Jam Symbols”
5
Place paper on the bypass tray and select the paper size.
P.73 “3.Bypass Copying”
6
Place the original and try to copy again.
When “POWER FAILURE” appears, press the [FUNCTION CLEAR] button twice to clear the
message. See P.312 “5.“POWER FAILURE”” for details.
1
Turn the power of the equipment OFF.
• You cannot shut down the equipment.
3
Remove all the paper from the bypass
tray.
4
Turn the power ON.
To Next Page
Loading...
