4 ADVANCED COPYING FUNCTIONS
110 Changing Sizes in Horizontal and Vertical Directions - XY ZOOM -
7
Press the [COPY] button several times until the lamp of the desired
paper size is lit.
e.g.) Selecting LT for copy paper
y You can select the desired paper size with the [DRAWER] button in the same proce-
dure.
y When standard size paper other than LD, LT, LT-R, LG or ST-R is placed, register this
size as “OTHER” size in advance.
P.49 “Registering other standard sizes”
8
Select the other copy modes as required, and then press the
[START] button.
To Next Page
Loading...
