Toshiba E-STUDIO207 - Image Mode Settings

Image Mode 157
Image Mode
This section describes how to change the image mode.
1
Press the [USER FUNCTIONS] button.
The “user functions mode” main screen is displayed.
2
Select “DEFAULT SETTINGS” with and buttons, and then
press the [ENTER] button.
3
Select “COPY SETUP” with and buttons, and then press the
[ENTER] button.
4
Select “IMAGE MODE” with and buttons, and then press the
[ENTER] button.
USER FUNCTIONS 1216
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
DEFAULT SETTINGS
01.GENERAL SETTING
02.COPY SETUP
03.FAX SETUP
COPY SETUP
01.MENU CUSTOMIZE
02.APS/AMS
03.IMAGE MODE