Menu Customize 153
Menu Customize
This section describes how to change the setting of the custom function. A copy function which
has been registered as a custom function can be quickly recalled by pressing the selecting but-
ton B on the “copy mode” main screen.
1
Press the [USER FUNCTIONS] button.
The “user functions mode” main screen is displayed.
2
Select “DEFAULT SETTINGS” with and buttons, and then
press the [ENTER] button.
3
Select “COPY SETUP” with and buttons, and then press the
[ENTER] button.
4
Select “MENU CUSTOMIZE” with and buttons, and then
press the [ENTER] button.
USER FUNCTIONS
1216
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
DEFAULT SETTINGS
01.GENERAL SETTING
02.COPY SETUP
03.FAX SETUP
COPY SETUP
01.MENU CUSTOMIZE
02.APS/AMS
03.IMAGE MODE
To Next Page
Loading...
