6 TROUBLESHOOTING
200 Before Calling Service Technician
The copy image is partially
missing.
The size or direction of the
copy paper and the original,
or the reproduction ratio is
not set properly.
Use copy paper of the same size as the
original or set the reproduction ratio suit-
able to the copy paper size.
The margin for binding is too
wide.
Adjust the image shift value again.
P.86 “Shifting Paper to Make Margin -
IMAGE SHIFT -”
The copy image has black
streaks in a horizontal direc-
tion.
The scanning area or guides
are stained.
Clean them.
P.202 “Daily Inspection”
The charger is dirty. Clean the charger.
P.203 “Cleaning charger”
The copy image has white
streaks in a horizontal direc-
tion.
The transfer charger wire is
dirty.
Clean the transfer charger wire.
P.204 “Cleaning transfer charger”
Phenomenon Usual cause Countermeasure
To Next Page
Loading...
