Toshiba e-STUDIO2515AC - Page 100

2.Copier-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
2-46
<Note>
• “Minimizing moiré” and “Sharpening the copy image” are mutually contradictory. When the
adjustment is performed to minimize moiré, the resolution of the copy image may decrease.
 Caution after the adjustment
Nothing in particular.
 Remarks
Enter a value within the recommended value range mentioned in the procedures. Otherwise, it may
cause a loss in MFP performance, including degradation in the image quality.
+3
+50
+75
|
+1
0
+25
|
0
-25
0
|
-2
-75
-50
|
-4
-100
-100
|
+4
+75
+100
|
+2
+25
+50
|
-1
-50
-25
|
-3
-100
-75
|
Since “-25” is assigned to the center, the image quality
remains the same even if the indicator is changed from “-3” to
“-4”.
Assigned
adjustment value
of sharpness
Default:
Setting value “103”:
Soft Sharp