© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
i
Table of Contents
1. General Adjustments – Copying, Printing and e-Filing
(Output from Box)
1.1 To Obtain a Darker Image ............................................................................................. 1-1
1.2 To Adjust the Density on a Solid Colored Image........................................................... 1-7
1.3 To Achieve the Image Quality Most Suitable for the Paper Used
(To eliminate blur and graininess from an image) ....................................................... 1-12
1.4 To Minimize Variations in the Image Quality under the Operating Conditions
(To optimally program image quality control) ............................................................. 1-17
1.5 To Correct Out-of-Registration Colors......................................................................... 1-25
1.6 To Adjust Printing Positions on Front and Back Sides in the duplex mode................. 1-29
2. Copier-specific Adjustments
2.1 To Make Copy Suitable for the Original......................................................................... 2-1
2.2 To Copy Text Clearly (To eliminate faint, smudged or blurred text) .............................. 2-3
2.2.1 To Adjust the Copy Image Quality in the Black Mode ............................................. 2-4
2.2.2 To Adjust the Copy Image Quality in the Full Color Mode .................................... 2-10
2.3 To Closely Match the Color Balance of the Original .................................................... 2-15
2.4 To Improve the Reproducibility of Gray ....................................................................... 2-20
2.5 To Copy in Vivid Colors ............................................................................................... 2-23
2.6 To Make the Pale Area of the Original Look Darker and Sharper
(To improve the highlight reproducibility)..................................................................... 2-28
2.7 To Eliminate the Background Color /
To Copy Dark Text by Eliminating Fogs around It....................................................... 2-32
2.7.1 To Adjust the Copy Image Quality in the Black Mode ........................................... 2-33
2.7.2 To Adjust the Copy Image Quality in the Full Color Mode .................................... 2-35
2.8 To Avoid Copying the Image Seen through the Back of a Page Printed
on Thin Paper .............................................................................................................. 2-38
2.8.1 To Adjust the Copy Image Quality in the Black Mode ........................................... 2-39
2.8.2 To Adjust the Copy Image Quality in the Full Color Mode .................................... 2-41
2.9 To Eliminate Moiré....................................................................................................... 2-43
2.10 To Copy Sharply (To enhance sharpness).................................................................. 2-47
2.11 To Make Photo Edges Look Softer.............................................................................. 2-50
2.12 To Make Solid Filled Bold Text (Logo) Highly Colored................................................ 2-54
2.12.1 To Adjust the Copy Image Quality of a Black Logo............................................... 2-55
2.12.2 To Adjust the Copy Image Quality of a Colored Logo ........................................... 2-57
2.13 To Sharply Contrast the Hues of Highlighters on the Copy......................................... 2-59
2.14 To Obtain a Good Color Balance on Thick Paper ....................................................... 2-63
2.15 To Obtain Smooth Gray-Scale Photo Images ............................................................. 2-68
2.16 To Change the Threshold in Auto Color Mode
(To change the threshold between the Full color mode and the Black mode to
meet the user’s needs) ................................................................................................ 2-69
2.17 To Adjust the Twin-Color Copy Image Quality ............................................................ 2-72
2.17.1 To Adjust the Tint of Colors other than Black ........................................................ 2-73
2.17.2 To Adjust the Boundary between Black and Colors other than Black ................... 2-74
2.17.3 To Adjust the Tint of Specified Colors for Twin-Color or Single-Color Copying .... 2-75
2.18 To Adjust the Image Quality Scanned from the DF ..................................................... 2-77
2.19 To Program Frequently Used Copy Settings (To use Custom Mode) ......................... 2-80
2.19.1 To Adjust User Custom Mode Settings in Black Mode.......................................... 2-80
2.19.2 To Adjust User Custom Mode Settings in Full Color Mode ................................... 2-83
2.20 To Copy While Erasing Shadow Outside of Image ..................................................... 2-88
2.21 To Avoid Copying Blank Page of Original Scanned with DF ....................................... 2-90
2.22 To Obtain Image in Even Density Level ...................................................................... 2-92
2.23 To Improve Reproducibility of Red Seal Color ............................................................ 2-94
To Next Page
Loading...
