Toshiba e-STUDIO2515AC - To Adjust Colors; To Adjust Color Balance and Density

3.Printer-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
3-43
3.4 To Adjust Colors
 Explanation
To adjust the color reproducibility of printouts, change the settings of the printer driver or perform various
image quality adjustments.
 Procedures
Refer to the procedure corresponding to the user‘s particular request.
3.4.1 To Adjust Color Balance and Density
 Explanation
If you would like to change the color balance or darkness of the printouts and reproducibility of low/
middle density in accordance with a type of original or the user’s requirements, change the “color
balance” option on the printer driver.
 Procedures
(1) Perform color balance adjustment.
For details of the adjustment procedure, refer to "3.1.5 Color Balance Adjustment".
 Caution after the adjustment
Nothing in particular
Before adjustment After adjustment
The natural color balance is obtained.
The desired color balance is obtained.
(Ex. Yellowness is enhanced.)