Toshiba e-STUDIO2515AC - To Make Photo Edges Look Softer

To Next Page

To Previous Page

2.Copier-specific Adjustments

2-50

2.11 To Make Photo Edges Look Softer

 Explanation

When a photo image is copied, the contours or edges of the image sometimes become highly visible on

the copy. Perform adjustment regarding image processing (sharpness intensity), in order to soften the

edges of the image.

 Procedures

• You can start with any of the procedures. But it is recommended to perform the procedures in order, as

listed below. You can perform one procedure in conjunction with another. But if this changes the image

quality more than required or loses the effectiveness of the adjustment, restore the settings made in

the previously performed procedure to the original ones. Then perform other procedures.

• Both the service technician and the user can perform procedures (1) and (2).

• Only the service technician must perform procedures (3) to (5).

Before adjustment After adjustment

The edges (contours) of the image are

highly visible.

The edges look soft.

Other manuals for Toshiba e-STUDIO2515AC