2.Copier-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
2-86
Full
color
05-7690 -
Color
reproduction
selection
0 to 6 0
0: Same as Text/Photo,
printed image, text, map
(text priority) mode
1: Same as Photo mode
2: Same as Red seal color
mode
3: The gray level becomes a
more bluish one than the
one specified in the setting
value “0”.
4: The highlight
reproduction becomes more
emphasized than the one
specified in the setting
value “0”.
5: Same as Text/Photo,
printed image, text, map
(photo priority) mode
6: Text/Photo, printed
image, text, map mode
(equivalent to the setting
value “0” of the base model
(*1): reproduction which
enhances the redness of
skin)
(*1): e-STUDIO2000AC/
2505AC/3505AC/4505AC/
5005AC
2.4
05-7718 -
Density
adjustment
(Manual
adjustment
(Center value))
0 to 255 128
The larger the value, the
darker the image becomes.
2.2.2
05-7725 -
Density
adjustment
(Automatic
density
adjustment)
0 to 255 128
The larger the value, the
darker the image becomes.
2.2.2
05-7795 -
Sharpness
adjustment
0 to 255 128
The larger the value, the
sharper the image
becomes. The smaller the
value, the softer the image
becomes and the less moire
appears.
2.2.2
05-7816 -
Black header
density level
adjustment
0 to 8 0
The larger the value, the
darker the header becomes.
The smaller the value, the
lighter the header becomes.
2.12.1
Color
mode
[05] Code
Sub
code
Adjustment
Acceptable
value range
Default Setting value
Reference
section
To Next Page
Loading...
