3.Printer-specific Adjustments
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved
3-52
Procedures
Both the service technician and the user can perform all adjustments.
(1) Change the “Brightness” option on the printer driver.
• Select the desired value for brightness on a scale of “-4” (Darkest) to “4” (Lightest).
For Windows
Open the property page of the printer driver. Click [Setting] in the “Image Quality” tab.
Change the “Brightness” option in the “Image Attribute” tab.
PCL
PS
XPS
To Next Page
Loading...
