e-STUDIO205L/255/305/355/455 © 2009 TOSHIBA TEC CORPORATION All rights reserved
ADJUSTMENT
3 - 62
[B] Adjustment
If the pins cannot be fitted into the holes, perform the adjustment according to the following procedure.
(1) Remove the right-hand hinge screw at the
rear side.
Fig. 3-59
(2) Loosen the left-hand hinge screw at the rear
side.
Fig. 3-60
(3) Loosen the hinge screws at the front side.
Fig. 3-61
To Next Page
Loading...
