6
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO205L/255/305/355/455
ERROR CODE AND TROUBLESHOOTING
6 - 3
E200 Paper transport jam Upper drawer transport jam (Paper not reaching the
registration sensor): The paper does not reach the
registration sensor after it has passed the 1st
transport sensor.
P. 6 - 28
E210 Lower drawer transport jam (Paper not reaching the
registration sensor): The paper does not reach the
registration sensor after it has passed the 1st
transport sensor.
P. 6 - 28
E220 Lower drawer transport jam (Paper not reaching the
1st transport sensor): The paper does not reach the
1st transport sensor after it has passed the lower
drawer feed sensor.
P. 6 - 29
E270 Bypass transport jam (paper not reaching the
registration sensor): The paper does not reach the
registration sensor after it has passed the 1st
transport sensor.
P. 6 - 29
E280 ADU transport jam (paper not reaching the
registration sensor): The paper which has passed
through ADU and the 1st transport sensor does not
reach the registration sensor during duplex printing.
P. 6 - 29
E300 PFP upper drawer transport jam (Paper not
reaching the registration sensor): The paper does
not reach the registration sensor after it has passed
the 1st transport sensor.
P. 6 - 28
E310 PFP upper drawer transport jam (Paper not
reaching the 1st transport sensor): The paper does
not reach the 1st transport sensor after it has
passed the 2nd transport sensor.
P. 6 - 29
E320 PFP upper drawer transport jam (Paper not
reaching the 2nd transport sensor): The paper does
not reach the 2nd transport sensor after it has
passed the PFP upper drawer feed sensor.
P. 6 - 30
E330 PFP lower drawer transport jam (Paper not
reaching the registration sensor): The paper does
not reach the registration sensor after it has passed
the 1st transport sensor.
P. 6 - 28
E340 PFP lower drawer transport jam (Paper not
reaching the 1st transport sensor): The paper does
not reach the 1st transport sensor after it has
passed the PFP lower drawer feed sensor.
P. 6 - 29
E350 PFP lower drawer transport jam (Paper not
reaching the 2nd transport sensor): The paper does
not reach the 2nd transport sensor after it has
passed the PFP upper drawer feed sensor.
P. 6 - 30
E360 PFP lower drawer transport jam (Paper not
reaching the PFP upper drawer feed sensor): The
paper does not reach the PFP upper drawer feed
sensor after it has passed the PFP lower drawer
feed sensor.
P. 6 - 31
E3C0 LCF transport jam (Paper not reaching the
registration sensor): The paper does not reach the
registration sensor after it has passed the 1st
transport sensor.
P. 6 - 28
E3D0 LCF transport jam (Paper not reaching the 1st
transport sensor): The paper does not reach the 1st
transport sensor after it has passed the 2nd
transport sensor.
P. 6 - 29
E3E0 LCF transport jam (Paper not reaching the 2nd
transport sensor): The paper does not reach the
2nd transport sensor after it has passed the LCF
feed sensor.
P. 6 - 30
Error code Classification Contents Troubleshooting
To Next Page
Loading...
