9
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO205L/255/305/355/455
POWER SUPPLY UNIT
9 - 5
<<Output connector>>
Not linked with the door switch
Linked with the door switch
Connector Destination Voltage
CN418 For the SYS board +5VS, +5VA, +5VB, +12VA
CN415 For the LGC board, FUS board, PFP/LCF (via LGC
board), Bridge unit / Job separator / Offset tray (via
LGC board), finisher
+5VB
CN419 For the SLG board, RADF +5VB, +12VB
Connector Destination Voltage
CN415 For the LGC board, High-voltage transformer (via
LGC board), PFP/LCF (via LGC board), Bridge unit /
Job separator / Offset tray (via LGC board),
finisher
+5VD, +24VD1, +24VD4
CN417 For the Main motor, MOT/MOT2 board +24VD2
CN419 For the SLG board, RADF +24VD1, +24VD3
To Next Page
Loading...
