Toshiba e-STUDIO3515AC - Page 171

3.Printer-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
3-11
To enhance thin lines and small-size text, perform the following adjustments.
• Set the value in increments of around 10, while checking the print image until the optimum value is
obtained.
• The setting value “25” corresponds to one step in the sharpness adjustment on the printer driver.
<Notes>
• If a much too large value is set, small text may be blurred.
• If “0” is set, the image quality will not be changed even if the sharpness has been adjusted on the
printer driver.
Color
mode
Original
type
Object [05] Code Subcode
Recommended
value
Acceptable
value range
Default
Color
Standard
Tex t
8110
0
When a larger
value is set, a
sharper result
can be obtained.
When a smaller
value is set, a
softer result can
be obtained.
0 to 255
128Graphic 1
Image 2
Photo
Tex t
8111
0128
Graphic 1 0
Image 2 128
Presentation
Tex t
8112
0128
Graphic 1 0
Image 2 128
Line art
Tex t
8113
0
128Graphic 1
Image 2
Red Seal
Color
Tex t
8109
0
128Graphic 1
Image 2
Twin
Color
-
Tex t
8108
0128
Graphic 1 0
Image 2 128
Black -
Tex t
8118
0
128Graphic 1
Image 2