Toshiba e-STUDIO3515AC - Page 172

3.Printer-specific Adjustments
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved
3-12
You can also change the range to make a thin line and the small text emphasize..
• When “0” is set, white voids on the boundary of the color may become conspicuous.
Jaggies on thick lines can be suppressed by applying thin line adjustment to Graphic and increase the
sharpness setting level on the printer driver.
 Caution after the adjustment
Nothing in particular
Color mode PDL Resolution
[05]
Code
Subcode
Recommended
value
Acceptable value
range
Default
Full color
PS
600 dpi 8102
00
0 to 1
0: Applied to all the
contents for Image
and Graphic
1: Applied to all the
contents, the small
text for Text and a
thin line for Graphic
1
PCL 1 0 1
XPS 2 0 1
Black
PS
600 dpi 7322
00 1
PCL 1 0 1
XPS 2 0 1