Toshiba e-Studio477s - Put the Bottoms of the Anti-tip Feet on the Floor; Put the Machine on the Additional Drawer Unit; Attach the Additional Drawer and Spacer to the Caster Unit; Fix the Additional Drawer Unit with the Joint-Option

- 35 -
Installing Additional Paper Feed Unit
1
2
4
5
6
3
(5) Put the bottoms of the anti-tip
feet on the oor and tighten
them with three screws.
Attach the screw in the middle of the
oval cutout and tighten the screw.
4
Attach the additional drawer and
spacer to the caster unit.
(1) Insert the posts of the cabinet to the
bottom holes of the drawer.
Drawers
Spacer
Post
(2) Fix the drawer with the joint-
option and tighten the screws
with the screw-knob.
Joint-
Option
Screw-Knob
Tighten them on the both sides.
5
Put the machine on the additional
drawer unit.
CAUTIO
N
May cause injury!
•
At least two people are needed to safely
lift the machine due to its 50 kg weight.
(1) Align the rear sides of the
machine and the additional
drawer unit and place the
machine quietly.
(2) Fix the additional drawer unit
with the joint-option, and tighten
the screw with the screw-knob.
Screw Knob
Joint Option