Toshiba e-Studio477s - Loading the Paper in the Tray Cassette; Open the Drawer; Adjust the Paper Guide and Paper Stop; Paper Orientation for Loading

- 63 -
How to Load the Paper
1
2
4
5
6
3
•
How to Load the Paper
Loading the paper in the tray
cassette
Plain paper is the only type of paper that can be
loaded in the drawer.
Follow this procedure to load the paper in
the drawer. After you have loaded the paper,
congure the paper type and thickness by using
the operator panel.
1
Flex the stack of paper back and
forth a few times. Then, make a neat
stack by straightening its edges
against a level surface.
2
Open the drawer.
Note
•
Do not remove the cork that is attached to the plate.
3
Adjust the paper guide and paper
stop to t the paper size, and make
sure they are secure.
Paper Stop
Paper Guide
Paper Guide
4
The side that you want to print on
should be placed face down when
loading the paper.
5
Check the paper guide, and make
sure that the paper is secure.
Paper
Guide
6
Display the size of the paper to be
loaded on the indicator then insert
the indicator.