Toshiba e-Studio477s - Configuring the Printer on Mac OS X

- 40 -
Installing Additional Paper Feed Unit
1
2
4
5
6
3
Copying the PPD le for Windows
The Client Utilities/User Documentation DVD
contains a machine description le for popular
Windows applications. For applications not
allowing the automatic installation of PPD les,
copy the PPD le to a proper directory in order
to enable printer-specic settings in the [Print]
dialog box or the [Page] Setup dialog box.
Setting Up the Printer for Mac
OS X
Conguring the printer on Mac OS X
After you copy the PPD le to the library folder
in the System Folder, you can congure the
machine.
The equipment supports the following Macintosh
Printing Services:
•
LPR printing
& P.40 “Conguring LPR printing”
•
IPP printing
& P.41 “Conguring IPP printing”
•
Bonjour printing
& P.42 “Conguring Bonjour printing”
Memo
•
These Macintosh Printing Services are available when the
equipment and your computer are connected over TCP/IP
network.
Conguring LPR printing
1
Open System Preferences and click
[Print & Scan].
2
Click [+].
3
Click [IP] and specify the items as
described below.
Protocol: Line Printer Daemon - LPD
Address: <IP address or DNS name of this
equipment>
Queue: print
Name: <Any Name>
Location: <Any Name>
Print Using: TOSHIBA MonoMFP-X7
Memo
•
For MAC OS X 10.4.x to 10.6x, select TOSHIBA
MonoMFP-X4.
•
In the [Name] box, the name that is entered in the
[Address] box is automatically displayed.
•
The way to select the PPD le differs depending on
countries or regions as follows:
-
For North America
Even when you enter the IP address or DNS name
of this equipment in the [Address] box, the correct
PPD le is not selected in the [Print Using] box.
Therefore, select [Other] in the [Print Using] box,
and select the PPD le TOSHIBA MonoMFP-X7 from
the [/Library/Printers/PPDs/Contents/Resources/
en.lproj] folder.
-
For the UK
When you enter the IP address or DNS name of
this equipment in the [Address] box, the correct
PPD le is automatically selected in the [Print
Using] box. If the correct PPD is not automatically
selected, select [Select a driver to use] and
choose the PPD le displayed in the list.