Toshiba e-Studio477s - About Auto Tray Switching (Auto Tray Switch Function)

- 69 -
How to Load the Paper
1
2
4
5
6
3
7
After setting the paper size and
paper type, press [OK].
The menu returns to the BASIC menu.
8
Select other copy modes as
required, and then press the
[START] button on the control
panel.
About Auto Tray Switching
(Auto Tray Switch Function)
When a drawer or bypass tray runs out of paper
while printing, the machine locates another
drawer or bypass tray with the same size of
paper and begins feeding paper from that
drawer.
If an additional drawer unit has been installed,
up to 1460 pages can be continuously printed or
copied (A4 paper only).
Paper Switch Order.
When operating the automatic paper feed
function, the following order of priority for the
drawer or bypass tray is selected.
Memo
•
If you are loading non-conventional paper such as OHP
lm or labels in the bypass tray, the auto tray switch may
mistakenly use the wrong paper source. In this situation,
we recommend conguring paper other than plain paper in
advance.
When you are printing copies or
received faxes.
Drawer 1 à Drawer 2 à Drawer 3 à Drawer 4 à
Bypass Tray
When you are printing from the
computer.
Starting from the drawer or bypass tray that is
currently being used, follow the settings of the
[Paper Source] of the printer driver.