Toshiba e-Studio477s - Registering a Custom Size (Undefined Size); Place the Original(s) and Paper; Press [SIZE SETTING] on the Touch Panel; Press Button of Same Size as Paper

- 68 -
How to Load the Paper
1
2
4
5
6
3
Registering a Custom Size
(Undened Size)
When using custom sizes, congure the width
and length of the paper here.
1
Place the original(s) and paper.
& Basic Guide
2
Press [SIZE SETTING] on the touch
panel.
3
Press the button of the same size as
the paper you placed on the bypass
tray.
The selected size will be registered as an “OTHER”
size.
4
Press [OTHER] under “COPY”.
The paper size is now set to the one registered as
“OTHER” size.
Note
•
If the paper size is not selected in this step, copying
may be slowed down.
5
Press [PAPER TYPE] if the paper you
placed on the bypass tray is other
than plain paper.
6
Press the button of the same paper
type as the paper you placed on the
bypass tray. Then press [OK].
Note
•
If you select a wrong paper type, this could cause a
paper misfeed or signicant image trouble.
•
When you select a paper type, you can conrm it
with the icons displayed on the equipment status
indication area. For details, refer to the Basic Guide.