Toshiba e-Studio477s - Selecting the Paper Source and Output Method for Each Paper Type

- 60 -
About Paper
1
2
4
5
6
3
Paper
Type
Paper Size
Paper Source Output Method
Drawer*
1
Bypass
Tray
Manual
Face Up
(Page Output
from the
front)
Face Down
(Page Output
from the
back)
Drawer 1
Drawer 2
*
2
Drawer 3
Drawer 4
Thick 5 A4, A5
B5, letter
Legal (13 inch)
Legal (13.5 inch)
Legal (14 inch)
Folio
Executive
A6
Custom*
3
Envelope *
5
Com-10, DL
C5
Label*
5
A4
Index Card Index Card
*1
: The order of the drawers from the bottom up is Drawer 1, Drawer 2, Drawer 3, and Drawer 4
*2
: Drawer 2, Drawer 3, and Drawer 4 are optional.
*3
: Custom: Width of 64 to 216 mm and a height of 127 to 1321 mm. Printable size for duplex printing:
Width of 148 to 216 mm and a height of 210 to 356 mm.
*4
: Width of 148 to 216 mm and a height of 210 to 356 mm.
*5
: When using postcards, envelopes, and labels, the printing speed becomes slower.
Note
•
If you load the paper vertically ( ) in the drawer, but congure the machine to horizontal ( ), this will slow the print
speed.
•
If you load A6 paper, but congure the machine to A5 size and a paper width of 148 mm or less (A5 width), this will slow
the print speed.
•
If you congure the paper size to [Custom] by using the operator panel, the [Paper Size Dial] setting of the drawer
cassette becomes unavailable.