Toshiba e-Studio477s - How to Load the Paper; After Setting Paper Size and Type, Press [OK]; Select Other Copy Modes and Press [START]; Close the Bypass Tray

- 67 -
How to Load the Paper
1
2
4
5
6
3
Paper type Icon
PLAIN −
PLAIN (THIN)
THICK 1
THICK 2
THICK 3
THICK 4
THICK 5
SPECIAL 1
SPECIAL 2
SPECIAL 3
ENVELOPE 1
ENVELOPE 2
ENVELOPE 3
ENVELOPE 4
Note
•
Automatic 2-sided copying can be applied to plain
paper and THICK 1.
•
For envelopes, only 1-sided copying can be
performed on its front side.
11
After setting the paper size and
type, press [OK].
The menu returns to the BASIC menu.
12
Select other copy modes as
required, and then press the
[START] button on the control
panel.
13
After printing is completed, close
the bypass tray.
(1) Close the paper support.
Paper Support
(2) Slide each manual feeding
paper guides back to its original
position.
Manual feeding
paper guide
(3) Fold up the bypass tray.
Bypass Tray