Toshiba e-Studio477s - Configuring IPP Printing; Open System Preferences and Click [Print & Scan]; Click [IP] and Specify the Items

- 41 -
Installing Additional Paper Feed Unit
1
2
4
5
6
3
4
Click [Add].
The [Installable Options] window appears.
5
Set the following options.
•
Model Selection
TOSHIBA e-STUDIO527C Series
— Choose this for using
e-STUDIO477C/527C.
•
Finisher
Not Installed — Select this if a nisher is
not installed.
Inner Finisher (1 Tray) — Select this
when the Inner Finisher is installed.
Note
•
Even if you choose [Not Installed] for the Finisher
option during print settings, the nisher options such
as stapling can be selected. If you select the nisher
options for printing but the nisher is not installed,
nisher settings will be ignored and printing will be
performed correctly.
•
Drawers
Drawer 1
Select this when the drawer 1 is installed.
Drawer 1 & Drawer 2
Select this when the drawer 1 and 2 are
installed.
Drawer 1, 2 & Drawer 3
Select this when the drawer 1, 2 and 3 are
installed.
Drawer 1, 2 & Drawer 3, 4
Select this when the drawer 1, 2, 3 and 4
are installed.
Drawer 1 & LCF
Select this when the drawer 1 and LCF are
installed.
Drawer 1, 2 & LCF
Select this when the drawer 1, 2 and LCF
are installed.
6
Click [OK].
The printer is added to the Printer List.
Conguring IPP printing
When you want to setup IPP print queue in the
Mac OS X, follow the procedures below.
1
Open System Preferences and click
[Print & Scan].
2
Click [+].
3
Click [IP] and specify the items as
described below.