4 USING TEMPLATES
100 Using Scan Templates
10
On the password input screen, enter the template password using the keyboard and
digital keys, and then press [OK].
11
Press [OK].
12
When the AUTHENTICATION screen is displayed, enter the user name and the
password to complete the user authentication.
1) Press [USER NAME] and enter the user name.
2) Press [PASSWORD] and enter the password.
3) Finally, press [OK].
If you select a template for which the automatic start function is enabled ( is shown on the button),
the equipment automatically starts the scanning operation. (End of procedure)
If you select a template for which the automatic start function is disabled, the SCAN menu appears.
In this case, proceed to step 13.
Pressing each button displays an on-screen keyboard. Enter each item using the keyboard and
digital keys, and then press [OK] to set the entry. Ask the administrator for the user name and
password.
To Next Page
Loading...
Need help?
General
