Description of Each Component
9
18. [ACCESS] button
Use this button when the department code or user
information has been set. If this button is pressed after
copying, etc., the next user needs to enter the department
code or user information.
& P.62 “Logging in” in this manual
19. [CLEAR] button
Use this button to correct the numbers keyed in, such as
the number of copy sets.
20. Digital keys
Use these keys to enter any numbers such as the number
of copies, telephone numbers or passwords.
21. [COUNTER] button
Use this button to display the counter.
& MFP Management Guide (PDF): “Chapter 3: MANAGING
COUNTERS (COUNTER MENU)”
22. [INTERRUPT] button
Use this button to interrupt print processing and perform
a copy job. The interrupted job is resumed through your
pressing this button again.
23. [USER FUNCTIONS] button
Use this button for paper size or media type setting of
drawers, and registration of the copy, scan and FAX
settings including a default setting change.
& MFP Management Guide (PDF): “Chapter 1: SETTING
ITEMS (USER)”
& MFP Management Guide (PDF): “Chapter 2: SETTING
ITEMS (ADMIN)”
Adjustment of the angle of the control panel
The angle of the control panel is adjustable: right, left, up or down.
Adjustment of the height and angle of the control panel
Adjusting the height of the control panel
The height of the control panel is adjustable for your convenience.
To Next Page
Loading...
Need help?
General
