Toshiba E-studio5540c User Manual

Chapter 1 PREPARATIONS
16
Placing originals
Original glass
1
Raise the Reversing Automatic Document Feeder.
2
Place the original with its face down on the
original glass and align it against the left rear
corner.
3
Lower the Reversing Automatic Document Feeder
carefully.
Reversing Automatic Document Feeder
1
Place the originals face up on the original feeder
tray.
2
Align the side guides to the original length.
Do not place any heavy objects (4 kg (9 lb.) or over) on
the original glass and do not press on it with force.
Breaking the glass could injure you.
A4-R
(
LT-R
)
B4
(
LD
)
• You need to select the original size by yourself when
placing the following originals whose sizes cannot be
detected correctly:
- Highly transparent originals (e.g. overhead
transparencies, tracing paper)
- Totally dark originals or originals with dark borders
- Non-standard size originals (e.g. newspapers,
magazines)
& Copying Guide (PDF): “Chapter 3: BASIC COPY MODES”
- “Paper Selection”
• When placing mixed-size originals on the Reversing
Automatic Document Feeder (optional), adjust its side
guides to the widest original, and then align the originals
against the guide on the front side.

Toshiba E-studio5540c Specifications

General

Brand	Toshiba
Model	E-studio5540c
Category	All in One Printer
Language	English