20
Basic Copying Operation
The basic copying procedures, such as enlargement/reduction copying and duplex copying as well as bypass copying,
are as follows.
Place the original(s).
& P.16 “Placing originals” in this manual
2
Making copies
press the [START] button on the
control panel. Copying starts.
4
• To stop copying, press the [STOP] button on the control
panel and then [MEMORY CLEAR] on the touch panel.
• Printed paper exits to the exit tray of the equipment or
the Finisher (optional). The tray to which the paper exits
is indicated by the arrow on the touch panel.
Select the copy modes as required.
3
Press the [COPY] button on the control panel.
1
You can switch the color mode. There are 3 color
modes as shown below.
FULL COLOR: All originals are copied in full color.
(Default)
BLACK: All originals are copied in black and
white.
AUTO COLOR: The equipment automatically judges
the type of each color on originals.
Colored originals are copied in full color
and black-and-white originals are
copied in black and white.
To Next Page
Loading...
Need help?
General
