Placing Paper and Originals
This section explains how to set paper and originals. Incorrect setting causes image skews or paper jams. Follow the
procedure below.
Placing Paper and Originals
15
Pull out the drawer and release the lock.
Place paper in the drawer.
Set the end guide so that it matches the paper
size.
Set the side guides so that they match the paper
size.
Lock the guides and push in the drawer.
Be sure that the height of the stacked paper does not
exceed the MAX line indicated on the side guides.
Placing paper
Be careful not to catch your ngers when pushing the
drawer back
This could injure you.
For paper available for the equipment, see the following
page:
& P.65 “Specications of Equipment” in this manual
To Next Page
Loading...
