Toshiba e-STUDIO557 - 8.3.13 Finisher related service call

8
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856/557/657/757/857
ERROR CODE AND TROUBLESHOOTING
8 - 113
8.3.13 Finisher related service call
[CB10] Feed motor abnormality
[CB20] Delivery motor abnormality
Classification Error item
Finisher related service call
Check item Measures
Second feed motor (M8) • Motor check
• Connector check
• Harness check
Shutter closed detecting switch
(MS4)
•Switch check
• Connector check
• Harness check
Shutter open sensor (PI5) • Sensor check
• Connector check
• Harness check
Safety zone switch (MS3) • Switch check
• Connector check
• Harness check
Shutter upper/lower bar • Move check
Finisher control board • Connector check
• Board check
Replace parts Remarks
Second feed motor
Shutter closed detecting switch
Shutter open sensor
Safety zone switch
Finisher control board
Classification Error item
Finisher related service call
Check item Measures
Delivery motor • Motor check
• Connector check
• Harness check
Delivery motor clock sensor (PI10) • Sensor check
• Connector check
• Harness check
Finisher control board • Connector check
• Board check
Replace parts Remarks
Delivery motor